Select language:Chinese  English  

Homw About us Products News network Jobs Contact us
Transformer
Regulators
Voltage regulator
Reactor
Variable frequency power
Switching Power Supply
Equipment
Start counter
Products Location:Home >> Products >> Reactor >> Start the reactor      
Name:Start the reactor
Type:Reactor
Infomation:

StartReactor
                          
一、 Use
AC induction motor at rated voltage starting, the initial starting current is large, often many times more than the rated current (typically 5 to 7 times), in order to reduce the starting current, does not make an impact on the grid, usually lower voltage method to start AC induction motor, commonly used step-down method is used reactor or from the lotus transformers, motor starting process is very short (typically a few seconds until minutes), starting after the step-down starter in the reactor or removed from the lotus transformer. The product is based on characteristics of high-voltage asynchronous motor start design, matching motor power 220 ~ 1400kW.                   
二、 Structural characteristics
1. QKSG dry-type reactor core starting with high-quality imported silicon steel core, core columns evenly divided by the number of sub-paragraph gap, gap with epoxy board as isolated, and high temperature high strength adhesive to ensure the gas gap in the reactor does not change at run time
2.End of high quality silicon steel core rubber face so firmly integrated with silicon steel, which greatly reduces operation noise and good anti-corrosive
3.Coil around the package structure, the main coil insulation glass fiber impregnated with epoxy resin, heat cured under vacuum drying impregnated with high temperature insulation paint, the coil is not only good insulation, and high mechanical strength, can tolerate large motor starting current shock and cold shock without cracking.
三、 Conditions of Use
1. Not more than 1000 meters above sea level.
2 operating ambient temperature of -25 ℃ ~ +45 ℃.
3. Installed in indoor non-violent vibration, no harmful gas or powder dust of the occasion, not inflammable and explosive materials.
4. When the start time of at least 2 minutes (once or several times the sum), should be cool 6 hours before starting again.

四、 Performance parameters
1. Dry starter oil immersed reactors than traditional reactors, air-core reactor volume to be small, light weight, small footprint, simple installation and convenient.
2. Class H temperature rating to (180 ℃); normal operation, the dry core Starting Reactor core temperature less than 85K, the coil temperature is not greater than 95K.
3. Dry type iron core Starting Reactor loss than the loss of oil-immersed reactors.
4. Dry type iron core Starting Reactor noise is not greater than the national standard (50dB)

 

Specification
Starting capacity kvar
Rated voltage KV
Dimensions
L * B * H (mm)
Activated motor power (KW)
QKSG-220
393
6KV
10KV
Or
Passenger
Household
Means
Set
865*330*700
220
QKSG-250
445
895*340*730
250
QKSG-280
493
910*345*740
280
QKSG-315
553
925*350*760
315
QKSG-355
620
940*355*785
355
QKSG-400
700
955*360*800
400
QKSG-450
787
975*360*820
450
QKSG-500
854
1015*385*840
500
QKSG-560
963
1030*385*880
560
QKSG-630
1081
1090*390*905
630
QKSG-710
1215
1105*390*920
710
QKSG-800
1366
1120*410*970
800
QKSG-900
1538
1135*410*1015
900
QKSG-1000
1844
1150*420*1060
1000
QKSG-1120
2040
1170*430*1095
1120
QKSG-1250
2273
1225*440*1120
1250
QKSG-1400
2543
1250*445*1145
1400
                                      
 
 
 
 
 
 
 
 
 

Typical values for these parameters, and can be tailored to customer requirements, our company reserves the right to change the data

All rights reserved by Shanghai dirong Electric Equipment Manufacturing Co., Ltd.